Enping YUEPU Electro-acoustic Equipment Factory was founded in 1989, where is located in Enping. Enping is internationally known for professional microphones maker. Yuepu is one of the oldest manufacturers among this industry.
The technology in our factory is rich and powerful. The production and inspection of the facilities are advanced and well equipped, and the quality check system is extremely reliable. Our factory supplies a wide range of audio equipment such as amplifiers, mixing desks, speakers, and microphones. We can customize the equipment according to our client needs, and can guarantee a speedy manufacture process.
Our product use a unique crafting technique, and from the entry of raw materials into the factory, to the outcome of the products. All are under the supervision and examination of our technicians. This ensures that the products are of a stylish appearance and of high quality performance. In this competitive market, "YUEPU" are your better choice than others. Our products are highly spoken by our customers domestically and internationally.
Our aim is to provide the best quality, the most reasonable price and a full package service for our customers.
Welcome to visit our factory in Enping.
Feature:
1) AUX audio input
Put external audio (such as DVD, CD, MP3) into AUX, choose "LINE" from the decoding board, adjust volume and equalizer to enable to play sounds in suitable position.
2)USB/ SD card
Input USB or SD, the speaker will automatically start playing. "PREV" is to forward and "NEXT" is to backward. "MODE" button is to switch different modes.
3)Bluetooth
Choose "blue" from "MODE" button, turn on your Bluetooth device to connect Bluetooth, user can play music and control volume by your phone after it is connected.
4) Wireless microphone
Turn on the speaker. Put battery into the microphone and then turn on microphone. When the RF light is on means speaker receives microphone's signal. Then user can start to speech. At the same time, the user can adjust volume and echo of mic 1 or mic 2.
5) FM broadcasting
Choose "FM" from MODE button. Long press " PLAY" button to start searching radio channels. After finish searching, user can press " PREV" to forward radio channel or " NEXT" to backward radio channel.
6) Wired microphone
Plug in wire, and adjust volume, bass and treble in order to play sound in suitable position.
7) Charging
The speaker has built in rechargeable battery. Remember to charge after done to use. Green light on means in the process of charging and red light means done of charging.
8)Low voltage reminder
When it shows yellow light, it means low voltage. Please charge the speaker.
Transmitter | |
Function | Parameters |
Usage | Hand, neck hanging, desktop |
Frequency Range | 2300~2490MHz |
Current consumption | 28mA |
Supply voltage | 3.3V~5V |
Number of channels | 80 |
Modulation | GFSK,BT=0.5Gaussian |
Sampling frequency | >48K |
Transmit power | 15dBm |
Input impedance | 1OK Ohm |
Input Level | 2.8Vp-p(Max) |
Life time | About 6 hours |
Audio Delay | <12ms |
Frequency response | 40~18KHz |
Dynamic RangeDynamic Range | @1kHz 81dB |
Separation | @1kHz 90dB |
Working temperature | -35ºC~60ºC |
Charger | Input 180 ~ 240V, 50 ~ 60Hz |
Output: DC5V, 400mA standard USB female port |
Size | 63.6mm*23.8mm*20.2mm |
Receiver | |
Function | Parameters |
Output Power | 50W |
Frequency Range | 20Hz-20KHz(+-3dB) |
Total harmonic distortion | ≤0.5% |
Signal to noise ratio | ≥90dB |
Signal Input | Built-in wireless microphone x1, balanced inputs x1, wired microphone input X2 |
Function Panel | Independent microphone volume control, independent reverb adjustment, |
independent bass and treble adjustment, independent music volume adjustment |
Power supply voltage | 110V~240V |
Working temperature | -35ºC~60ºC |
Craft box | Seamless connection box |
Size | main / deputy box 21cm * 16cm * 33cm |